ASM STEEL BAND FAMILY JR DUAL BAND

The P 250 JR/ P 500 JR steel band point hoist range is equipped with two steel bands, which ensures a evenly balancing of the load. This makes the hoist especially suitable for attaching line arrays or other loudspeaker systems. The basic models are equipped with a special ASM gearbox, which does not require brakes. The dynamically self-locking gear stops the load gently and reliably even in the event of a power failure. The hoist features a gearbox with a safety catch, which sets a superior safety standard in the market.

The P 250 JR safely moves loads of up to 250 kg with a speed of 0.2 m/s.  This P 250 JR hoist uses two steel bands of 30 x 0,4 mm as load bearing lines.

The P 500 JR safely moves loads of up to 500 kg with a speed of 0.1 m/s.  This P 500 JR hoist uses two steel bands of 45 x 0,4 mm as load bearing lines.

The P 250 JR/ P 500 JR point hoists are designed in strict conformity with the DGUV V17 and EN 17206 regulations and are designed to allow performing flying of people.

The P 250 JR/ P 500 JR point hoists are made to be SIL 3 ready and can be coupled with a SIL3 control, such as ASM GENESIS SIL3 control.

Example of P500 JR 0,1-SIL3

STANDARD FEATURES & BENEFITS

  • Mount under an I-beam, or vertically on a truss, or within a truss, self-climbing hoist
  • Durable load bearing lines, two steel bands
  • Silent and accurate operation
  • The hoist features gearboxes with a safety catch, which sets a superior safety standard in the market
  • Load carrying device by means of tear proof tested eyelet
  • Optimal capacity to own weight ratio
  • Rotation-proof operation of the load possible
  • The hoist is especially suitable for attaching line arrays or other loudspeaker systems
  • Use where smooth deceleration of the load is needed, even in the event of a power failure
  • Control possibilities include 24V or full synchronous ASM GENESIS control

THE JR POINT HOIST RANGE

The P 250 JR models with speed 0.2 m/s are equipped as standard with a self-locking gear and an extra safety catch integrated in the gearbox. The equipment with a self-locking gear allows the operation without brakes. It ensures a smooth deceleration of the load of 250 kg even in the event of a power failure. Since brakes are not required, the hoist requires less maintenance.

The control possibilities reach from a 24V, third party control to a full synchronous ASM GENESIS SIL3 control.

The P 500 JR models with speed 0.1 m/s are equipped as standard with a self-locking gear and an extra safety catch integrated in the gearbox. The equipment with a self-locking gear allows the operation without brakes. It ensures a smooth deceleration of the load of 500 kg even in the event of a power failure. Since brakes are not required, the hoist requires less maintenance.

P 250 JR

P 500 JR

Max. (variable) speed in m/s 0,2 0,1
Hoist Capacity in kg on Steel Band 250 500
Number of Steel Band 2
Load Bearing Line steel bands 30 x 0,6 mm
Max. Travel in m 12 * 20
Safety System self locking-gear
Motor Type asynchronous
Motor Performance in kW 1,5 kW

* more on request

TECHNICAL DATA

Photos of Application